​Log Furniture Tools , Log Tenon Cutter, Log Furniture Plans Tenon Jig   Lomberjack Tools          LOG X PRO 1 TENON CUTTER

Router motor and router bits are not included

$179.00

PATENT PENDING


We know Log Furniture       Les Smith  owner of LOGMAN and co-author of the book BUILD YOUR OWN LOG FURNITURE , INVENTOR of the LOGMAN TENON MAKERS  and  LOGMAN  LOG X PRO TENON CUTTERS.

Our new user friendly & affordable Logman Log X Pro models are now available !

If you are looking to build log furniture and log hand railing  this is the right tool for you.

The Logman Log X Pro models will give you the opportunity to make almost any diameter tenon with almost any type shoulder and at the same time keep your tenons in a straight line .

The Logman Log X Pro models make tenon diameters from 7/8” up to 7” , nothing else compares.  All you do is put a 1/4” diameter hole 1" deep at each end of a log & start spinning logs with the new crank handle.  No more struggling when your trying to put a bent log arch in a headboard of a bed or adding a bent log arch to the back of a love seat”. The hardest thing to do when building log furniture is putting tenons on bent logs. Now with the least amount of effort you can add some logs with character to what ever your building.

With tenon cutters that go on drills you have eye ball your tenons from one end of the log to the other.

One very important log tenon is a log tenon with a flat or square shoulder . When your building coffee tables chairs benches and more you'll want to use a log tenon with a flat or square shoulder. Bulding with square or flat shouldered tenons make's  for sturdy log furniture. If the cross pieces on a log beds have square shoulders the square shoulder tenons can butt up against the log headboard and footboard post for added strength. With the Logman X Pro models all you need to to do is get a straight router bit & you'll be cutting square shouldered tenons. The Logman X will allow you to create the shoulder of your choice. The sky's the limit ,there are 1,000's of different router bit profiles on the market.

Log Tenon Cutter


 ​LOG X Pro 1  INCLUDES  

New  All LOG X PRO MODELS THAT HAVE NOT YET  SHIPPED AND THAT HAVE BEEN ORDERED  WILL HAVE A POLISHED STEEL  and silver zinc coating . This is something new for 2017

HEAVY DUTY STEEL CRANK HANDLE BRACKET

HEAVY DUTY STEEL BRACKET THAT HOLDS THE  ROUTER MOTOR    

SCREWS  AND RED WING SCREWS

TWO THREADED RODS , ONE WITH CRANK HANDLE

 2 HOSE CLAMPS FOR SECURING ROUTER MOTOR
 TWO THREADED ROD BRACKETS

TWO 1/4" THICK BRACKETS THAT FIT OVER 2x4 LUMBER

 TWO 18"SQUARE  STEEL TUBES





SOME OF THE ROUTER MOTORS THAT WILL WORK ON THE LOG X PRO MODELS ARE LISTED BELOW & ALSO SHOWN IN THE PHOTO BELOW

PORTER CABLE MODEL  7518,690, AND 890

BOSH   MODEL  1617,1618,

MIKITA MODEL 1101

HITACHI  MODEL  M12VC

MILWAUKEE MODEL 5625,5615,5616,5619

CRAFTSMAN  MODELS 17543,17540,28190

RIGID, MODEL R29302